Enter an account id, Select color emulation mode, Use the embedded web server – HP Designjet Z6100 Printer series User Manual

Page 100: Use a driver

Advertising

Use the Embedded Web Server

To remove top and bottom blank areas through the Embedded Web Server, go to the Submit Job page

on the Main tab. In the Job Settings tree, select Advanced settings > Roll options and then

select Remove top/bottom blank areas.

Use a driver

●

In the Windows driver, go to the Features tab and select Remove top/bottom blank

areas.

●

In the Mac OS Print dialog box, go to the Finishing panel and select Remove top/bottom

blank areas.

Enter an account ID

Use this feature to assign an account ID to a print job for accounting purposes. The account ID appears

in the printer-generated accounting reports. To track of job-accounting information, set your printer to

require an account ID for each job that is submitted. This setting makes the account ID field mandatory

and jobs that have no account ID revert to a "on hold for accounting" status.

NOTE:

Be aware that when you submit more than one job at a time by clicking the Add files

button in the Embedded Web Server, all of the jobs that you submit will adopt the settings of the

final job that you submit. However, none of the jobs in the print queue are affected.

Use the Embedded Web Server

To enable the Account ID feature, go to the Submit Job page on the Main tab. In the Job Settings

tree, select Advanced settings > Roll options and then select Account ID.

Use a driver

●

In the Windows driver, go to the Features tab and type an Account ID in the Account ID field.

●

In the Mac OS Print dialog box, go to the Accounting panel and type an Account ID in the

Account ID field.

Select color emulation mode

Select color emulation modes through the Embedded Web Server, in a driver or on the front panel. For

more information about application-managed colors and printer-managed colors, see

Color-management

options on page 114

Use the Embedded Web Server

To select a color emulation mode through the Embedded Web Server, go to the Submit Job page on

the Main tab. In the Job Settings tree, select Advanced settings > Color and then select one of the

settings from the Color Management drop-down menu. If you select the Printer emulation setting,

you can then select the printer series you that want to emulate from the drop-down menu.

NOTE:

Be aware that when you submit more than one job at a time by clicking the Add files

button in the Embedded Web Server, all of the jobs that you submit will adopt the settings of the

final job that you submit. However, none of the jobs in the print queue are affected.