HP Designjet Z6100 Printer series User Manual
Page 46
6
.
Wait until the paper emerges from the printer, as shown in the following graphic.
NOTE:
If you have an unexpected problem at any stage of the paper loading process,
see
The paper cannot be loaded successfully on page 163
.
7
.
Align the edge of the paper with the blue line and the left edge of the semi-circle to the right of the
platen.
TIP:
It may be helpful to also align the lead edge of the paper with the front edge of the
platen. You can use a blade or scissors to improve the lead edge of the paper if it is not
straight or is not cut well.
8
.
When the paper is correctly aligned with the blue line and half-circle, lower the paper-load lever.
9
.
Wait for the front-panel message that prompts you to wind excess paper onto the roll.
34 Chapter 4 Handle the paper
Handle the paper