HP Designjet Z6100 Printer series - Manual (Page 95)

Use the Embedded Web Server
To set the margins through the Embedded Web Server, go to the Submit Job page on the Main tab.
In the Job Settings tree, select Advanced settings > Paper > Layout/Margins. Then use the
Select margins drop-down menu to set the margins. Select from: Default, Small, Normal and
Extended.
NOTE: Be aware that when you submit more than one job at a time by clicking the Add files
button in the Embedded Web Server, all of the jobs that you submit will adopt the settings of the
final job that you submit. However, none of the jobs in the print queue are affected.
Use a driver
Specify the margins in the following ways:
● In the Windows HP-GL/2 Normal margins and Standard layout are selected by default. To
change the margins and layout options, click the Paper/Quality tab and click the Layout button.
● In the Windows PostScript driver, Normal margins and Standard layout are selected by default.
To change the margins, click the Paper/Quality tab, select More from the Document size drop-
down menu, and then select the desired page size and the margins at the same time. Click the
Layout button to change the layout options.
● In the Mac OS driver, select Page Setup from the File menu, select your printer in the in the Format
for popup menu, and then select Paper size. You select the page size and the margins at the same
time.
NOTE: In the Windows PostScript driver, you have the option of selecting a paper size with no
margins. The No margins option should only be selected in conjunction with the Oversized
and Clip contents by margins layout settings.
NOTE: In Mac OS driver, the available margins options depend on the paper size that you
selected in the Page Setup dialog box.
You have the option of selecting a paper size with no margins. To select the No margins option,
click the Printing dialog, select the Finishing panel, and then click the Layout tab. The No
margins option should only be selected in conjunction with the Oversized and Clip contents
by margins layout settings.
Use the front panel
On the front panel, select the icon, and then select Printing preferences > Margins > Select
margins.
Resize a print
You can send an image to the printer at a certain size but tell the printer to resize it (normally larger). This
can be useful in the follow situations:
● If your software does not support large formats
● If your file is too large for the printer's memory. In this case, you can reduce the page size in your
software and then scale it up again by using the front-panel option
Resize a print 83
P
ri
nt opti
ons