HP Designjet Z6100 Printer series - Manual (Page 56)

4
. Remove the loop-shaping core.
5
. Use the winding button on the take-up reel motor to wind the excess paper around the take-up reel
spindle.
6
. Press the OK button on the front panel.
7
. The printer knows if the type of paper that is loaded is suitable for the automatic paper-cutter. The
paper is cut if it is suitable. If the paper is not suitable, cut the paper manually.
NOTE: The automatic paper-cutter feature is disabled for some of the heaviest media types,
because they can damage the cutter.
44 Chapter 4 Handle the paper
Handle the paper