HP Designjet Z6100 Printer series - Manual (Page 82)

9
. Using the same sponge, clean the lower strip of electrical contacts on the printhead (unless the
printhead is new). Avoid touching the upper set of electrical contacts.
CAUTION: Do not touch the surface of the printhead that contains the nozzles, because
the nozzles are easily damaged.
10
. After waiting a few moments to allow both connectors to dry, replace the printhead into the printhead
carriage. See Insert a printhead on page 64 .
11
. After completing the cleaning process, open the carriage interconnect wiper by pulling on the sponge
tab.
12
. Remove the soiled sponge from the carriage interconnect wiper.
13
. Dispose of the soiled sponge in a safe place to prevent the transfer of ink onto hands and clothing.
70 Chapter 5 Handle the ink system
Ha
nd
le the
ink sys
tem