HP Designjet Z6100 Printer series - Manual (Page 74)

Printhead replacement must be performed after the printer has been turned on with the hard power switch
at the back of the printer.
1
.
On the printer's front panel, select the icon, and then select Replace printheads.
2
. The printer moves the carriage into the correct position.
CAUTION: If the carriage remains in the removal position for more than 3 minutes without
inserting or removing any printheads, it will attempt to return back to its home position to the
right.
3
. When the carriage has stopped moving, the front panel prompts you to open the printer window.
4
. Locate the carriage on the right side of the printer.
5
. Pull up and release the latch on top of the carriage.
62 Chapter 5 Handle the ink system
Ha
nd
le the
ink sys
tem