Use the front panel – HP Designjet Z6100 Printer series User Manual
Page 115
Use the front panel
To change the graphic language setting, select the
icon, and then select Printing preferences
> Select graphics language, where the following options are available.
●
Select Automatic to allow the printer determine which type of file it is receiving. This setting works
for most software programs.
●
Select PS if you are printing only PostScript files, and if your PostScript jobs do not start with the
standard PostScript header (%!PS) and do not include PJL language-switching commands
Alternatively, select PS if you have experienced problems while downloading PostScript fonts. In this
case, select Automatic again after you have downloaded the fonts.
If you are downloading fonts over a USB connection, select the
icon, and then select Printing
preferences > PS > Select encoding.
●
Select TIFF, JPEG, PDF, or CALS G4 only if you are sending a file of the appropriate type directly
to the printer without going through a printer driver. This is normally done only through the Embedded
Web Server, which sets the language without user intervention.
NOTE:
The PS and PDF options are available with PostScript printers only.
Use the HP Easy Printer Care (Windows) or HP Printer Utility (Mac
OS)
Change the graphic language setting from the HP Easy Printer Care and HP Printer Utility by using the
following steps.
1
.
In Windows, click the Settings tab and then select Printer settings > Printing preferences.
In Mac OS, select Configuration and then select Printer settings > Configure printer
settings > Printing preferences.
2
.
Select one of the following options:
●
Select Automatic to allow the printer determine which type of file it is receiving. This setting
works for most software programs. Automatic is the recommended value.
●
Select HP-GL/2 only if you are sending a file of the appropriate type directly to the printer,
without going through a printer driver
Change the graphic language setting 103
P
ri
nt opti
ons