HP Designjet Z6100 Printer series User Manual
Page 47
10
.
Wind the excess paper onto the roll. Use the hub to turn the roll in the direction shown.
11
.
Lower the printer window.
12
.
Wait for the front panel to again prompt you to wind excess paper onto the roll.
13
.
The printer will perform a color calibration if it has not already calibrated the paper type you are
using, and if color calibration is turned on. See
Color calibration on page 110
.
14
.
a) Select the paper category and paper type of the roll you are loading.
NOTE:
If it is not clear which paper category or paper type to select, see
Supported paper
types on page 28
.
b) Select the length of the roll you are loading.
NOTE:
If the paper that you are using has a paper-data barcode printed on the leading
edge of the roll, the paper information is automatically loaded into the printer.
Load a roll into the printer 35
H
a
ndle the paper