HP Designjet Z6100 Printer series - Manual (Page 42)

Paper type Product name Front panel name
Technical Paper Natural Tracing Paper Natural Tracing Paper
Translucent Bond Translucent Bond
Vellum Vellum
Film Transparent/Clear Film Transparent/Clear Film
Matte Film Matte Film
Proofing Paper HP Professional High-gloss Contract
Proofing Paper
HP HG Contract Proofing
HP Professional Semi-gloss Contract
Proofing Paper
HP SG Contract Proofing
HP Proofing Matte HP Proofing Matte
Proofing Gloss Paper Proofing Gloss Paper
Proofing Semi-Gloss/Satin Paper Proofing SG/Satin Paper
Proofing Matte Paper Proofing Matte Paper
Self-Adhesive Material Adhesive Polypropylene Adhesive Polypropylene
Adhesive Vinyl Adhesive Vinyl
Fabric/textile Material (Shown only if a custom paper is
downloaded from the Internet)
TBD
Load a roll onto the spindle
1
. Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer
from moving.
2
. Remove the first end of the spindle from the right side of the printer, and then move the spindle to
the right in order to extract the other end. Do not insert your fingers into the spindle supports during
the removal process.
The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end
to mount a new roll. The hub slides along the spindle to hold rolls of different widths.
Table 4-1 Supported paper types (continued)
30 Chapter 4 Handle the paper
Handle the paper