HP Designjet Z6100 Printer series - Manual (Page 106)

These are the two grayscale options:
● Gray and Black Inks Only: With this option, only gray and black inks are used to produce the
grayscale image.
● Full Set of Inks: With this option, a mix of colors are used to produce the grayscale image.
NOTE: The Full Set of Inks option can produce better results. Try using that option if you are
experiencing bronzing when printing on glossy paper. See The image has a metallic hue
(bronzing) on page 154 .
Print a draft
You can configure the printer for fast, draft-quality printing.
Use the Embedded Web Server
Through the Embedded Web Server, go to the Submit Job page in the Main tab. In the Job
Settings tree, select Basic settings and select Fast from the Print quality drop-down menu.
NOTE: Be aware that when you submit more than one job at a time by clicking the Add files
button in the Embedded Web Server, all of the jobs that you submit will adopt the settings of the
final job that you submit. However, none of the jobs in the print queue are affected.
Use a driver
● In the Windows HP-GL/2 or PostScript driver, go to the Paper/Quality tab and look at the Print
Quality section. Move the print-quality slider to the extreme left ('Speed').
● In the Mac OS Print dialog box, go to the Image Quality panel and move the print-quality slider
to the extreme left ('Speed').
Use the front panel
On the front panel, select the icon, and then select Printing preferences > Select quality
level > Fast.
NOTE: If you set the print quality from your computer, that overrides the print-quality setting on
the front panel.
Manage print jobs
Submit a job
1
. Access the Embedded Web Server. See Embedded Web Server setup options on page 23 .
94 Chapter 6 Print options
Print options