HP 3PAR Remote Copy Software - Manual (Page 130)

A.4 Setting Up Remote Copy
Remote Copy User’s Guide InForm OS Version 2.3.1
■ For 1-to-N Remote Copy configurations, follow steps 1 through 10 in Table A-3 to set up
the first pair in the configuration. Repeat the entire process for each additional pair up to a
maximum of two pairs.
For detailed instructions on setting up Remote Copy, refer to Chapter 3, Remote Copy
Setup or Chapter 4, Remote Copy in Domains .
NOTE: For 1-to-N Remote Copy, all Remote Copy pairs must share the same
primary storage server.
Table A-3. Remote Copy Setup
Step Reference Primary System Backup System
1 Setting Up the
Primary Server on
page 3.18
startrcopy --
2 “ For RCIP:
creatercopytarget
<target_name> IP
<node>:<IP_addr>
For RCFC:
creatercopytarget
<target_name> FC
<node_WWN>
<N:S:P:WWN>
--
3 Setting Up the
Backup Server on
page 3.19
-- startrcopy