HP 3PAR Remote Copy Software - Manual (Page 207)

B.71 statport
InForm OS Version 2.3.1 Remote Copy User’s Guide
curs
Specifies that only current statistics are displayed.
avgs
Specifies that only averages are displayed.
maxs
Specifies that only statics for maximum values are displayed.
<op>
The operation argument can be specified with one of the following arguments:
r
Specifies that read-only statistics are displayed.
w
Specifies that write-only statistics are displayed.
t|rw
Specifies that statistics for read and write totals are displayed.
<meas>
The measure argument can be specified with one of the following arguments:
iops
Specifies that I/O operations per second are displayed. If this argument is
used, the minimum threshold value must be specified using the value
argument.
bw
Specifies that statistics for bandwidth in bytes per second are displayed. If this
argument is used, the minimum threshold value must be specified using the
value argument.
svct
Specifies that statistics for service time in milliseconds are displayed.
size
Specifies that statistics for I/O operations in bytes are displayed.
<val> [k|K]|[m|M]|[g|G]