HP 3PAR Remote Copy Software - Manual (Page 320)

C.102 Synchronous Long Distance Remote Copy for Data Migration
Remote Copy User’s Guide InForm OS Version 2.3.1
5 Issue the showrcopy command on InServC and verify InServA and InServB are targets.
6 Add InServC as a target for the existing Remote Copy group Group1 and its volumes
testvv.0, testvv.1, testvv.2, testvv.3, and testvv.4 by issuing the admitrcopytarget
<target_name> <mode> <group_name>
[<primary_VV_name>:<secondary_VV_name>]... command on InServA.
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServA 60 IP ready mirror_config
InServB 61 IP ready mirror_config
Link Information
Target Node Address Status Options
InServA 0 10.100.33.96 Up
InServA 1 10.101.33.96 Up
InServB 0 10.100.33.195 Up
InServB 1 10.101.33.195 Up
receive 0 receive Up
receive 1 receive Up
# admitrcopytarget InServC periodic Group1 testvv.0:testvv.0
testvv.1:testvv.1 testvv.2:testvv.2 testvv.3:testvv.3 testvv.4:testvv.4