HP 3PAR Remote Copy Software User Manual
Page 332
D.2
Remote Copy User’s Guide
InForm OS Version 2.3.1
b
For both the primary and backup servers, create a 20 GB test virtual volume that
belongs to the CPG created in
step 2
where
<test_vv>
is the name of the virtual volume to be created.
c
Create a synchronous volume group on the primary server and assign the test volume to
that group.
where
<test_group>
is the name of the volume group to be created on the primary
server,
<target_name>
is the backup storage server (InServ2), and
<test_vv>
is the
name of the test volume created in
step 2
.
3
On the primary server, start the test group created in
step 2
.
4
Use the
statport -rcip
command to obtain statistics on throughput
Let the Remote Copy operation run for a while and then calculate the average throughput
reported.
On InServ1:
# createvv <test_cpg> <test_vv> 20g
On InServ2:
# createvv <test_cpg> <test_vv> 20g
On InServ1:
# creatercopygroup <test_group> <target_name>:sync
# admitrcopyvv <test_vv> <test_group> <target_name>:<test_vv>
On InServ1:
# startrcopygroup <test_group>
On InServ1:
# statport -rcip