HP 3PAR Remote Copy Software - Manual (Page 215)

B.79 stoprcopygroup
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
stoprcopygroup
DESCRIPTION
The stoprcopygroup command stops the Remote Copy functionality for the specified
Remote Copy volume group.
SYNTAX
stoprcopygroup [option <arg>] <group_name>
AUTHORITY
Super, Edit
OPTIONS
-nosnap
In synchronous mode, this option turns off the creation of snapshots. This is useful if
removercopygroup is to be run to remove Remote Copy. In asynchronous periodic mode,
this option deletes any current synchronization snapshots.
-t <target_name>
Indicates that only the group on the specified target is stopped. If this option is not used,
by default, the stoprcopygroup command will affect all of a group’s targets.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group to stop.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
further information.
EXAMPLES
The following example stops Remote Copy for Group1 :
cli% stoprcopygroup Group1