HP 3PAR Remote Copy Software - Manual (Page 95)

3.33 Synchronous Long Distance Remote Copy Setup
InForm OS Version 2.3.1 Remote Copy User’s Guide
3 Define a second target for InServB:
◆ <target_name> is the name of the Remote Copy target (for example, InServC).
◆ IP states that this is an IP link.
◆ <node> specifies the node that contains the IP connections to the target (for example
2:4:1and 3:4:1).
◆ <link_IP_addr> is the link IP address for the target system (for example,
10.100.33.96 and 10.101.33.96).
4 Start Remote Copy on InServC as follows:
5 Define a target for InServC:
◆ <target_name> is the name of the Remote Copy target (for example, InServA).
◆ IP states that this is an IP link.
◆ <N:S:P> specifies the node that contains the IP connections to the target (for example
0:2:1 and 1:2:1).
◆ <IP_addr> is the link IP address for the target system (for example, 10.100.33.96
and 10.101.33.96).
6 Define a second target for InServC:
◆ <target_name> is the name of the Remote Copy target (for example, InServB).
On InServB:
# creatercopytarget <target_name> IP <N:S:P>:<link_IP_addr>
<N:S:P>:<link_IP_addr>
On InServC:
# startrcopy
On InServC:
# creatercopytarget <target_name> IP <N:S:P>:<IP_addr> <N:S:P>:<IP_addr>
On InServC:
# creatercopytarget <target_name> IP <N:S:P>:<IP_addr> <N:S:P>:<IP_addr>