HP ProCurve 520wl Wireless Access Point - Manual (Page 101)

Other Network Settings
6-18
change your wireless interface settings change your wireless interface settings change your wireless interface settings change your wireless interface settings
enable/disable interference robustness enable/disable interference robustness enable/disable interference robustness enable/disable interference robustness
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3
or 4> interrobust <enable/disable>
This feature is only available for 802.11b wireless cards.
enable/disable closed system enable/disable closed system enable/disable closed system enable/disable closed system
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3 or 4> closedsys <enable/disable>
NOTE:
When disabled, a client configured with the Network Name “ANY” can connect to the WL520. This feature is only
available for 802.11b wireless cards.
enable/disable load balancing enable/disable load balancing enable/disable load balancing enable/disable load balancing
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3 or 4> ldbalance <enable/disable>
This feature is only available for 802.11b wireless cards.
enable/disable medium density distribution enable/disable medium density distribution enable/disable medium density distribution enable/disable medium density distribution
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3 or 4> meddendistrib <enable/disable>
This feature is only available for 802.11b wireless cards.
autochannel select (acs) autochannel select (acs) autochannel select (acs) autochannel select (acs)
ACS is enabled by default. In order to disable ACS, disable the cards in slots A and B and reboot.
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3 or 4> autochannel disable
[Device Name]>reboot 0
re-enable acs re-enable acs re-enable acs re-enable acs
– 3 = wireless card in Slot A
– 4 = wireless card in Slot B
[Device Name]>set wif <3 or 4> autochannel enable
[Device Name]>reboot 0