HP ProCurve 520wl Wireless Access Point - Manual (Page 123)

7-1
7777
recording your configuration settings recording your configuration settings recording your configuration settings recording your configuration settings
We recommend keeping a copy of the configuration settings for each of the WL520 devices in your network. The information
below is hard-coded in your system and can be viewed from the Web Interface pages by clicking the Configure button and
viewing the System and Interfaces screens.
Use the following pages to document your configuration. You can use this information to easily recover your network settings
if necessary.
MAC Address of the WL520 unit
AP software image version
BSP/Bootloader firmware version
Hardware revision level
MAC Address of the PC Card in Slot A
Driver version of the PC CArd in Slot A
MAC Address of the PC Card in Slot B
Driver version of the PC Card in Slot B