HP ProCurve 520wl Wireless Access Point - Manual (Page 48)

Issuing System Commands
3-10
upload upload upload upload
Figure 3-14 Figure 3-14 Figure 3-14 Figure 3-14 Command Screens - Upload Command Screens - Upload Command Screens - Upload Command Screens - Upload
Use the Upload Upload Upload Upload tab to upload Configuration files from the WL520. The TFTP server must be running, and configured to point to
the directory that is to contain the uploaded file. We suggest you assign the file a meaningful name, which may include version
or location information.
If you don’t have a TFTP server installed on your system, install the TFTP server from the CD. Select the “Xtras/SolarWinds”
sub-directory, double-click “OEM-TFTP-Server.exe”, and follow the directions given to complete the installation.
–
Server IP Address Server IP Address Server IP Address Server IP Address . Enter the TFTP server IP Address.
Double-click on the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server. Note: This is
the IP address that will be used to point the Access Point to the AP Image file.
– File Name File Name File Name File Name . Enter the name of the file to be uploaded.
Copy the updated AP Image file to the shared TFTP server folder. The default AP Image is located at C:/Program Files/
WL520_AP/AP/.
– File Type File Type File Type File Type . Select Config Config Config Config .
– File Operation File Operation File Operation File Operation . Select Upload Upload Upload Upload .
reboot reboot reboot reboot
Figure 3-15 Figure 3-15 Figure 3-15 Figure 3-15 Command Screens - Reboot Command Screens - Reboot Command Screens - Reboot Command Screens - Reboot
Use the Reboot Reboot Reboot Reboot tab to save configuration changes (if any) and reset the WL520. Entering a value of 0 (zero) seconds causes an
immediate reboot. Note that Reset Reset Reset Reset , covered below, does not save configuration changes.