HP ProCurve 520wl Wireless Access Point - Manual (Page 90)

CLI Command Types
6-7
help help help help
Displays instructions on using control-key sequences for navigating a Command Line, and displays command information and
examples.
1. Using help as the only argument:
[Device Name]>help
<space>
Figure 6-7 Figure 6-7 Figure 6-7 Figure 6-7 Results of “help ” CLI command Results of “help ” CLI command Results of “help ” CLI command Results of “help ” CLI command
2. Complete command description and command usage can be provided by:
[Device Name]>help <command name>
[Device Name]><command name> help
history history history history
Shows content of Command History Buffer. The Command History Buffer stores command statements entered in the current
session. To avoid re-entering long command statements, use the keyboard “up arrow” (Ctrl-P) and “down arrow” (Ctrl-N) keys
to recall previous statements from the Command History Buffer. When the desired statement reappears, press the “Enter” key to
execute, or you may edit the statement before executing it.
[Device Name]>
history
passwd passwd passwd passwd
Changes the CLI Password.
[Device Name]> passwd oldpassword newpassword newpassword
reboot reboot reboot reboot
Reboots Access Point after specified number of seconds. Specify a value of 0 (zero) for immediate reboot.
[Device Name]> reboot 0
[Device Name]>
reboot 30