HP ProCurve 520wl Wireless Access Point - Manual (Page 57)

Management Settings
4-8
managing the wl520 from a wireless host managing the wl520 from a wireless host managing the wl520 from a wireless host managing the wl520 from a wireless host
The VLAN feature enables wireless clients to manage the WL520. If the VLAN Management ID matches a VLAN User ID, then
those wireless clients who are members of both VLANs will have WL520 management access.
1. In the Web Interface, click the
Configure Configure Configure Configure button and select the Interfaces Interfaces Interfaces Interfaces tab.
2. Enter a unique unique unique unique Network Name Network Name Network Name Network Name (SSID) for each wireless NIC.
3. Select the Network Network Network Network tab and the VLAN VLAN VLAN VLAN sub-tab.
4. Set the VLAN User ID VLAN User ID VLAN User ID VLAN User ID for the wireless NICs in Slot A and Slot B to values between 1 and 4094.
5. Set the VLAN Management ID VLAN Management ID VLAN Management ID VLAN Management ID to a value equivalent to one of the VLAN User IDs.
6. Place a checkmark in the Enable VLAN Protocol box.
CAUTION: !
Once a VLAN Management ID is configured and is equivalent to one of the VLAN User IDs on the WL520, all
members of the User VLAN will have management access to the WL520. Be careful to restrict VLAN membership to
those with legitimate access to the WL520 device.
management settings management settings management settings management settings
Configure system management settings, including interface access passwords, destination port numbers, and service
timeouts. Select new passwords during initial configuration.
Figure 4-7 Figure 4-7 Figure 4-7 Figure 4-7 Management Configuration Screen Management Configuration Screen Management Configuration Screen Management Configuration Screen