Ethernet interface parameters, Wireless interface parameters, Wireless 802.11b parameters – HP ProCurve 520wl Wireless Access Point User Manual
Page 109: Ethernet interface parameters -26, Wireless interface parameters -26, Wireless 802.11b parameters -26, Parameter tables 6-26
Parameter Tables
6-26
ethernet interface parameters
ethernet interface parameters
ethernet interface parameters
ethernet interface parameters
wireless interface parameters
wireless interface parameters
wireless interface parameters
wireless interface parameters
Since the WL520 devices support two WL110 PC Card slots, we differentiate the two cards by using the table index:
— Slot A = index 3
— Slot B = index 4
The wireless interface group parameter is
wif
wif
wif
wif
, which displays the objects associated with both PC Cards A and B.
wireless 802.11b parameters
wireless 802.11b parameters
wireless 802.11b parameters
wireless 802.11b parameters
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
Ethernet Interface
Group
N/A
R
ethernet
Speed
Integer
10halfduplex
10fullduplex
10autoduplex
100halfduplex
100fullduplex
autohalfduplex
autoautoduplex (default)
RW
etherspeed
MAC Address
PhyAddress
N/A
R
ethermacaddr
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
Wireless Interfaces
Group
N/A
R
wif
Network Name
DisplayString
1 – 31 characters
My Wireless Network A
(default)
My Wireless Network B
(default)
RW
netname
Distance between APs
Integer
large (default)
medium
small
minicell
microcell
RW
distaps
Auto Channel Select (ACS)
Integer
enable (default)
disable
RW
autochannel
Interference Robustness
Integer
enable (default)
disable
RW
interrobust
DTIM Period
Integer
1 – 65535 sec1 = default
RW
dtimperiod
Operating Frequency Channel
Integer
1 - 11 (FCC) (3 = default)
1 - 13 (ETSI) (3 = default)
1 - 14 (JP) (3 = default)
10 - 13 (FR)
(10 = default)
RW
channel
RTS/CTS Medium Reservation
Integer
0 – 2347
Default is 2347 (off)
RW
medres
Multicast Rate
Integer
1 Mbit/sec (1)
2 Mbit/sec (2) (default)
5.5 Mbit/sec (3)
11 Mbit/sec (4)
RW
multrate
Closed Wireless System
Integer
enable
disable (default)
RW
closedsys
Load Balancing
Integer
enable (default)
disable
RW
ldbalance
Medium Distribution
Integer
enable (default)
disable
RW
meddendistrib
MAC Address
PhyAddress
12 hex digits
R
macaddr
Supported Data Rates
Octet String
Reported in 500 Kb/sec
intervals:
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
R
suppdatarates