Add an entry to the mac access control table, Radius authentication settings, Mac access control via radius – HP ProCurve 520wl Wireless Access Point User Manual

Page 34: Radius authentication settings -21, Mac access control via radius -21

Advertising

Other Security Configuration Settings

2-21

The MAC Authentication tab allows you to build a list of stations, identified by their MAC addresses, authorized to access the

WL520 device within your network. The list is stored inside each WL520 within your network.
–

Enable MAC Access Control

. Check this box to enable the Control Table.

–

Operation Type

. Choose between

Passthru

and

Block

. This determines how the stations identified in the MAC Access

Control Table are filtered.

add an entry to the mac access control table

1. Click the

Add

button in the

MAC Access Control Table

2. Enter the MAC address of the client station authorized to manage this WL520 device.
3. Add a comment as needed. Entries are automatically enabled.

disable or delete an entry in the mac access control table

1. Click the Edit

Edit

Edit button in the MAC Access Control Table.

2. Select the MAC Address you want to disable or delete.
3. Click

NOTE:

For larger networks that include multiple WL520 devices, you may prefer to maintain this list on a centralized

location using the

RADIUS Authentication Settings

radius authentication settings

The WL520 provides two methods for authenticating wireless clients using a RADIUS Server: MAC Access Control (described

below) and

IEEE 802.1x Security Mode

NOTE:

The WL520 supports additional RADIUS features. See

Advanced RADIUS Features

for details.

mac access control via radius

If you want to control wireless access to the network and if your network includes a RADIUS Server, you can store the list of

MAC addresses on the RADIUS server rather than configure each WL520 individually. From the RADIUS Authentication tab,

you can define the IP Address of the server that contains a central list of MAC Address values that identify the authorized

stations that may access the wireless network. You must specify information for at least the Primary RADIUS server. The Backup

RADIUS server is optional.

NOTE:

Problems with RADIUS Server configuration or RADIUS Authentication should be referred to the RADIUS Server

developer.

Advertising

Popular Brands

Popular manuals