HP StorageWorks 1510i Modular Smart Array - Manual (Page 150)

Table 7 Summary of RAID methods
RAID 0 RAID 1+0 RAID 5 RAID 6
Alternative name Striping Mirroring
Distributed Data
Guarding (DDG)
Advanced Data
Guarding (ADG)
Usable drive
space*
100% 50% 67% to 93% 50% to 96%
Usable drive space
formula
n n/2 (n-1)/n (n-2)/n
Minimum number
of physical drives
1 2 3 4
Tolerates physical
drive failure?
No Yes Yes Yes
Tolerates
simultaneous failure
of more than one
physical drive?
No
Only if no two
failed drives are in
a mirrored pair
No Yes
Read performance High High High High
Write performance High Medium Low Low
Relative cost Low High Medium Medium
*Values for usable drive space are calculated with these assumptions:
• All physical drives in the array have the same capacity.
• Online spares are not used.
• No more than 14 physical drives are used per array for RAID 5.
• No more than 56 drives are used with RAID 6.
Choosing a RAID level
Use Table 8 to help you determine the best RAID level for your environment.
Table 8 Choosing a RAID level
Most important characteristic Also important Suggested RAID level
Fault tolerance Cost effectiveness RAID 6
I/O performance RAID 1+0
Cost effectiveness Fault tolerance RAID 6*
I/O performance
RAID 5 (RAID 0 if fault tolerance
is not required)
I/O performance Cost effectiveness
RAID 5 (RAID 0 if fault tolerance
is not required)
Fault tolerance RAID 1+0
150 Storage overview