HP StorageWorks 1510i Modular Smart Array - Manual (Page 94)

set service
Description Configures the management interface network services.
Syntax
set service <service-name> enable|disable port=<port-
number>
Operands <service-name>
The name of the management interface service. Valid entries include the
following:
telnet—Telnet-based CLI interface
ssh—SSH-based CLI interface
http—Unencrypted web interface
https—SSL-encrypted web interface
snmp—SNMP agent
enable|disable
Enables or disables the service. The effect of this switch is service-specific
but likely involves starting and stopping listening on the service's network
port.
<port-number>
A valid TCP or UDP port number (depending on the service) to which the
service should listen, otherwise enter default if the default port for the
service is desired.
Example 1
To enable the HTTP service and set it to listen to non-standard port 8080:
CLI> set service http enable port=8080
Example 2
To disable the Telnet service:
CLI> set service telnet disable
See also • show service
• set management
newpage pi
94 Command reference