HP StorageWorks 1510i Modular Smart Array - Manual (Page 27)

accept unit
Description Changes the state of the unit back to VOLUME_OK. Use this command to
accept media exchange on a unit previously marked as failed. The accept
unit and accept units commands are identical in functionality.
Syntax accept unit [<unit_number>]
accept units
Operands <unit_number>
[Optional] The number of the unit to be reset. If no value is entered, all
units are reset.
Example
CLI> accept units
NOTE: Accept Unit will cause a temporary LUN path change to this controller.
[1970-01-04 15:46:39] SetPreferredPath start... owner=1, change_map=0x0, lun_to_
ctlr_map=0xFFFFFFFF
Media exchange completed successfully.
CLI> [1970-01-04 15:46:40] Quiescing host I/O for LUN map 0xFFFFFFFF... Host/pr
oxy I/O quiesced.
[1970-01-04 15:46:40] Quiescing cache (quick)... Cache quiesced.
[1970-01-04 15:46:40] Quiescing background I/O... Background quiesced.
[1970-01-04 15:46:40] Flipping ownership(s)... change_map=0x0, lun_to_ctlr_map=0
xFFFFFFFF
[1970-01-04 15:46:40] Processing work while quiesced... work processing complete
.
[1970-01-04 15:46:40] Resuming I/O... I/O Resumed.
See also • add unit
• bind unit
• delete unit
• show unit
• set unit
• expand unit
• extend unit
• migrate unit
• set unit_id
• show unit_id
• unbind unit
newpage pi
1510i Modular Smart Array Command Line Interface user guide 27