HP StorageWorks 1510i Modular Smart Array - Manual (Page 63)

9. On the menu bar at the top of the emulator window, select Transfer > Send File.
10. In the Send File window:
a. Click Browse, navigate to the directory in which you placed the firmware files, and then select
the firmware file.
b. Expand the Protocol drop-down box, and then select 1K Xmodem.
c. Click Send. A 1K Xmodem status window is displayed.
11. Wait for a completion message to display.
For example, the following messages are displayed on the MSA controller LCD panel:
MSA1510i updates: 307 FIRMWARE FLASH DONE
MSA20 updates:
313 FIRMWARE FLASH DONE ON BOX <n>
(Each attached storage enclosure is updated one at a time, in sequential box
number order.)
NOTE:
Do not interfere with or cancel the download process. Interrupting the download process
might corrupt the firmware.
1510i Modular Smart Array Command Line Interface user guide 63