HP StorageWorks 1510i Modular Smart Array - Manual (Page 54)

delete spare
Description Causes the specified drive to no longer be used as a spare by the specified
unit.
Syntax delete spare unit=<unit> <diskrange>
Operands <unit>
The unit (0-31) that will no longer have access to the spare or spares. This
is the same number that was given to the unit when it was created with
the ADD UNIT command.
<diskrange>
The spare drive or drives to remove from use. The range can include a
single disk, a series of consecutive disks, or multiple series of single or
consecutive disks. Disks are identified as disk<xyy>, where <x> is the box
number (1-3) and <yy> is the bay number (01-14). For example:
• disk101
• disk101-disk105
• "disk101 disk112-disk202 disk314"
Example
To cause disk 109 (box 1 in bay number 9) to stop being used as a spare by unit 2:
CLI> delete spare unit=2 disk109
See also • add spare
• expand unit
newpage pi
54 Command reference