HP StorageWorks 1510i Modular Smart Array - Manual (Page 66)

extend unit
Description Adds unused, available space in an array to the specified LUN.
Syntax
extend unit <unit> <sizing option>
Operands <unit>
The LUN to which the space will be added.
<sizing option>, where sizing option equals one of the following:
add_size=<xxxx>MB|GB—Specifies how much of the available space
in the array to add to the LUN, where <xxxx> represents the size. You
must specify if the size is MB or GB. If no size is specified, the maximum
available space of the included disks is assigned to the array.
new_size=<xxxx>MB|GB—This option can be used instead of add_size
to enter the total new size of the LUN, where <xxxx> represents the size.
You must specify if the size is MB or GB.
Example
To extend unit 2 by 1,000 MB:
CLI> extend unit 2 add_size=1000MB
The actual new volume size will be 1992MB.
Unit 2 is being extended.
Use “show unit 2” to monitor progress.
See also • add unit
• bind unit
• delete unit
• show unit
• set unit
• accept unit
• expand unit
• migrate unit
• set unit_id
• show unit_id
• unbind unit
newpage pi
66 Command reference