HP StorageWorks 1510i Modular Smart Array - Manual (Page 25)

3 Command reference
Command overview
The CLI uses the following basic types of commands:
add Creates new configuration elements.
bind Creates associations between iSCSI elements.
delete Removes configuration elements.
help
Displays all possible commands or a detailed description of a specified
command.
reset Restores the default values of configuration elements.
set Changes the value of configuration elements.
show
Displays detailed information about a configuration element or all configuration
elements in a table
NOTE:
For a complete list of available command types, use the following help command:
help display_all
NOTE:
Some CLI commands for iSCSI objects refer to an alias . The alias is an easy-to-remember 16-character
text string that refers to an object. In some cases, when an object is being added, if the alias is not
specified, it is automatically generated by the CLI. In other cases, you must specify the alias.
Canonical iSCSI target
The predefined iSCSI target alias refers to the canonical iSCSI target, which is used during discovery.
It can be used to configure authentication for discovery sessions.
CLI commands that can refer to the canonical iSCSI target are
set iscsi_keys , show iscsi_keys , and set
target_chap . Other commands produce an error if the canonical target is specified. For example,
it is not possible to delete the canonical target.
newpage pi
1510i Modular Smart Array Command Line Interface user guide 25