HP StorageWorks 1510i Modular Smart Array - Manual (Page 53)

delete route
Description Deletes the specified route entry from the routing table for the specified
controller.
Syntax delete route <ctlr> <ip[/<mask>]|default >
Operands <ctlr>
The controller of the route to delete. Valid options are A and B.
<ip[/<mask>]|default>
The IP address in dotted notation. If default is entered instead of an IP
address, the default gateway will be used.
If a subnet mask is included with the ip address, it must be entered in
dotted notation or number of bits, and must be entered directly after the IP
address, separated with a slash (/) character (no spaces).
Example
CLI> delete route a 10.10.10.10 10.10.10.140
See also • add route
• show route
newpage pi
1510i Modular Smart Array Command Line Interface user guide 53