HP StorageWorks 1510i Modular Smart Array - Manual (Page 37)

add target
Description Adds a new target to the target pool. The target name must be world wide
unique. If all target elements are already configured (all slots are in use in
the target configuration table), an error is returned.
NOTE:
To bind logical units to target LUNs, use the bind unit command. To create
iSCSI portals to allow initiators access, use the add ip , add portal_group ,
add portal , bind portal_group , and bind portal commands.
Syntax add target [name=<name>] [alias=<alias>]
Operands name=<name>
[Optional] A fully qualified iSCSI target name (1-223 characters). If no
iSCSI name is given, a default is generated.
alias=<alias>
[Optional] A fully qualified iSCSI alias name (1-16 characters).
Example
CLI> add target name=NewTarget1 alias=NewAlias1
The iSCSI target was added successfully.
Name: newtarget1
Alias: newalias1
See also • delete target
• show target
newpage pi
1510i Modular Smart Array Command Line Interface user guide 37