HP StorageWorks 1510i Modular Smart Array - Manual (Page 83)

set initiator
Description Sets the profile (operating system) associated with the initiator. If the profile
is not set for an initiator, a default profile is assigned.
Syntax set initiator <initiator> profile=<profile>
Operands <initiator>
The alias name of the iSCSI initiator.
profile=<profile>
The operating system profile to associate with the initiator, where <profile>
is one of the following entries:
windows—for Microsoft Windows servers.
linux—for Linux servers.
hp—for HP-UX servers.
openvms—for OpenVMS servers.
tru64—for Tru64 UNIX servers.
solaris—for solaris servers.
netware—for Netware servers.
xp—for XP servers.
Example
LI> set initiator initiator1 profile=windows
The initiator profile has been changed.
See also • show initiator
• show profile
newpage pi
1510i Modular Smart Array Command Line Interface user guide 83