HP StorageWorks 1510i Modular Smart Array - Manual (Page 87)

set isns
Description Sets the iSNS parameters.
Syntax set isns [service=enable|disable] [server_discov-
ery=manual|dhcp|slp] [esi=<esi_port>] [entity=<en-
tity_name>]
Operands service=enable|disable
[Optional] Enables or disables iSNS on the MSA1510i.
server_discovery=manual|dhcp|slp
[Optional] The method used to discover iSNS servers.
• Use manual if the iSNS servers are being added manually. (Default)
• Use dhcp if the iSNS servers are being discovered via DHCP.
• Use slp if the iSNS servers are being discovered via SLP.
esi=<esi_port>
[Optional] The TCP port used by the iSNS server for ESI monitoring. The
default port is 50000.
entity=<entity_name>
[Optional] The iSNS entity name for the MSA1510i. If no parameter is
specified, a default entity name is created.
Example
CLI> set isns enable server_discovery=dhcp
iSNS parameters set.
See also • show isns
newpage pi
1510i Modular Smart Array Command Line Interface user guide 87