HP StorageWorks 1510i Modular Smart Array - Manual (Page 36)

add spare
Description Causes the specified drive or drives to be used as a spare by the specified
unit.
Syntax add spare unit=<unit_number> <diskrange>
Operands unit=<unit number>
The unit (0-31) that will have access to the spare or spares. This is the
same number that was assigned to the unit when it was created with the
add unit command.
<diskrange>
The drive or drives to remove from active use. The range can include a
single disk, a series of consecutive disks, or multiple series of single or
consecutive disks. Disks are identified as disk<xyy>, where <x> is the box
number (1-3) and <yy> is the bay number (01-14). For example:
• disk101
• disk101-disk105
• "disk101 disk112-disk202 disk314"
Example
To cause drive 109 (box 1 in bay number 9) to be used as a spare by unit 2:
CLI> add spare unit=2 disk109
See also • delete spare
• expand unit
newpage pi
36 Command reference