HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 106)

106 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
To set the monitor
password 1. Click the Setup tab to display the Setup menu.
2. Click Authentication to expand the Authentication menu.
3. Click Account: Monitor to display the Authentication - Account: Monitor page.
Figure 2-44. Authentication - Account: Monitor Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting RADIUS
Servers
You set up RADIUS server authentication in the Authentication - RADIUS Servers
page.
RADIUS is an access control protocol that uses a challenge and response method for
authenticating users. Setting up RADIUS server authentication is optional.
For detailed information about setting up RADIUS and TACACS+ servers, see the HP
StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.
Enabling this feature is optional.
Control Description
Change Password New Password. Type the new administrator password in the text box. The password must
have a minimum of 6 characters.
Confirm New Password. Retype the new administrator password in the text box.