HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 82)

82 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
TIP: if the origin server is not the RCU server, you specify the remote path using the Uniform
Naming Convention (UNC) for the mapped drive. For example, \\<origin-file-server>\<local-
name>. If the origin server is the same as the RCU server then you must type its full path
including the drive letter, for example C:\data.
8. Type frequency of updates (synchronization) in seconds, in the Synch Frequency
text box.
9. Optionally, type a comment that describes the share in the Comment text box.
10. Click Add Share to add the share to the Shares list.
11. Click Save to write your settings to memory.
To synchronize and
initialize a share 1. Navigate to the Proxy File Service - Shares page.
2. In the Shares list check the Sync check box and click Update Shares. This action
downloads the initial copy of the share from the origin server to the HP EFS WAN
Accelerator and configures the share for automatic synchronization.