HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 88)

88 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
3. Use the controls to complete the configuration, as described in the following table.
4. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Modifying Ports
in a Port Label
You can add or delete ports associated with a port label in the Port Label: <Port Label
Name> page.
To modify ports in a
port label 1. Click the Setup tab to display the Setup menu.
2. Click Port Labels to display the Port Labels page.
3. Click the name of the port label you want to edit in the Port Labels list to display
the Port Label - <Port Label Name> page.
Figure 2-32. Port Label: <Port Label Name> Page
Control Description
Add New Port Label Label. Type the label name in the text box. The following rules apply:
• Port labels are not case sensitive and can be any string consisting of letters, the
underscore ( _ ), or the hyphen ( - ). There cannot be spaces in port labels.
• The fields in the various rule pages of the Management Console that take a physical
port number also take a port label.
• You should avoid using a number as a port label to avoid confusion.
• Port labels that are used in in-path and other rules, such as QoS, and peering rules
cannot be deleted.
• Port label changes (that is, adding and remove ports inside a label) are applied
immediately by the rules that use the port labels that you have modified.
• To avoid confusion, do not type a number.
Ports. Type a comma-separated list of port numbers.
Add Label. To add a neighbor to the peer list, click Add Peer.
Remove Selected Labels. To remove a label from the port labels list, select it and click
Remove Selected Labels.