HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 117)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 117
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
W
AN A
CC
EL
E
R
A
T
O
R
TIP: Click the configuration name to display the configuration settings in a new browser
window.
IMPORTANT: You must restart the HP EFS WAN Accelerator service for a configuration to
take effect. For detailed information, see
“Starting and Stopping Services” on page 119 .
Upgrading Your Software
You can upgrade or revert between software versions in the Software Upgrade page.
Import Configuration From IP/Hostname. Type the IP address or host name of the HP EFS WAN Accelerator from
which you want to import the configuration in the text box.
Remote Admin Password. Type the admin password for the remote HP EFS WAN
Accelerator in the text box.
Remote Config Name. Type the name of the configuration you want to import from the
remote HP EFS WAN Accelerator in the text box.
New Config Name. Type a new, local, configuration name for this appliance in the text
box.
Import Shared Data Only. Checked by default. Keep checked to copy only the
following common settings: in-path and out-of-path interface, protocols, CLI and Web,
statistics, NTP, SNMP, and alarm settings. The following settings are not automatically
copied: failover, SNMP (contact and location), log, and network settings.
Import Configuration. To perform the import configuration operation, click Import
Configuration.
The imported configuration appears in the Configuration list but does not become the
active configuration.