HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 68)

68 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
Modifying service port settings is optional.
To set a service port 1. Click the Setup tab to display the Setup menu.
2. Click Advanced Networking to expand the Advanced Networking menu.
3. Click Service Ports to display the Advanced Networking - Service Ports page.
Figure 2-22. Advanced Networking - Service Ports Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Control Description
Add Service Port Service Port. Type a port number in the text box. The default service ports are 7800 and
7810.
Add Port. To add the port to the service port list, click Add Port.
Set As Default Port. To set a port as the default port, select it and click Set As Default
Port.
Remove Selected Port. To remove a port from the service port list, select it and click
Remove Selected Port.
Add Service Port Mapping Destination Port. Type a port number in the text box.
Service Port. Type a port number in the text box.
Add Mapping. To add a mapping to the mappings list, click Add Mapping.
Remove Selected Mappings. To remove a mapping from the mappings list, select it and
click Remove Selected Mappings.