HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 54)

54 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
To map a host name to
an IP address 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings in the left menu to expand the Host Settings menu.
3. Click Hosts to display the Host Settings - Hosts page.
Figure 2-15. Host Settings - Hosts Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting Proxies
You can specify a Web or FTP proxy in the Host Settings - Proxies page.
This proxy is used when a Uniform Resource Locator (URL) is specified in the
Management Console or the CLI. For example, the proxy is used in the Software
Upgrade page if you specify a URL from which to download the software image.
This setting applies only if you specify FTP or HTTP in the URL.
Control Description
Add New Host Host IP. Type the IP address for the host.
Hostname. Type a host name.
Add Entry. To add a host and IP address, click Add Entry.
Remove Selected Hosts. To remove an entry, click the check box next to the name and
click Remove Selected Hosts.