HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 39)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 39
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
W
AN A
CC
EL
E
R
A
T
O
R
Enabling
Connection
Pooling
You configure connection pooling in the Optimization Service - Connection Pooling
page.
Connection pooling enables you to save an extra round-trip across the WAN for the
initial connection. Connection pooling is useful for protocols which open a large
number of short lived connections, such as HTTP.
To enable connection
pooling 1. Click the Setup tab to expand the Optimization Service menu.
2. Click Optimization Services to display the Optimization Service - Connection
Pooling page.
Figure 2-7. Optimization Service - Connection Pooling Page
3. Under Connection Pooling Size, type the connection pooling size in the
Maximum Connection Pooling Size text box. The default value is 20.
4. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before committing it to memory.)
5. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
IMPORTANT: You must restart the HP EFS WAN Accelerator service on the HP EFS WAN
Accelerator if you have modified your connection pooling parameters. For detailed information
about restarting the HP EFS WAN Accelerator service, see the
“Starting and Stopping Services”
on page 119 .