HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 55)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 55
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
W
AN A
CC
EL
E
R
A
T
O
R
Setting proxies is optional.
To enable a proxy 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings in the left menu to expand the Host Settings menu.
3. Click Proxies to display the Host Settings - Proxies page.
Figure 2-16. Host Settings - Proxies Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Apply to apply your settings to the running configuration.
6. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting Advanced Network Parameters
This section describes how to configure advanced network parameters in the HP EFS
WAN Accelerator. It contains the following topics:
‹ “Enabling Connection Forwarding,” next
Control Description
Web/FTP Proxy IP Address Type the IP address.
Port Type the corresponding port number.