HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 138)

138 3 C REATING HP EFS WAN A CCELERATOR R EPORTS AND L OGS
NOTE: If the connection is in an unknown state, the line is greyed-out.
3. Use the controls to customize the report, as described in the following table..
NOTE: If you have the Secure-CIFS feature enabled (which disables Server Message Block
(SMB) signing), the Network - Current Connections report displays Protocol Error—this is an
expected response. For detailed information about enabling Secure-CIFS, see
“Configuring
CIFS Protocol Support” on page 29 .
Control Description
Filter Type an IP address or port number in the Filter text box to filter the report.
Type All. Specifies all established active connections.
Established (Optimized) Only. Specifies the total established active connections.
Half-Opened (Optimized) Only. Specifies the total half-opened active connections. A
half-opened connection is a TCP connection in which the connection has not been fully
established. Half-opened connections count toward the connection count limit on the
appliance because at any time they might become a fully opened connection.
If you are experiencing a large number of half-opened connections, you might consider a
more appropriately sized system.
Half-Closed (Optimized) Only. Specifies the total half-closed active connections. Half-
closed connections are connections which the appliance has intercepted and optimized
but are in the process of becoming inactive. These connections are counted toward the
connection count limit on the appliance. (Half closed connections might remain if the
client or server does not close their connections cleanly.)
If you are experiencing a large number of half-closed connections, you might consider a
more appropriately sized system.
Pass-Through Only. Specifies the total connections passed through, unoptimized when
the connection limit has been reached.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.