HP LaserJet 8000 Multifunction Printer series - Manual (Page 135)

Chapter 3 Advanced Printing Tasks 135
Printing by Type and Size of Paper
2. From the Paper Handling Menu in the printer’s control panel, select the paper type
for each tray. If you are unsure what type you are loading (such as bond or
recycled), check the label on the package of paper. For supported types, see page
259 .
3. Select the paper size settings from the control panel.
z
Tray 1: If the printer has been set to TRAY 1 MODE=CASSETTE from the Paper
Handling Menu, also set the paper size from the Paper Handling Menu. If
custom paper is loaded, set the size of custom paper from the Printing
Menu to match the paper loaded in Tray 1. To print custom-size paper, see
page
118 .
z
Other trays: Paper size settings are adjusted when paper is properly loaded
into the printer. (See the sections on loading paper, starting on page
76 .)
4. From the software or printer driver, select the desired type and size of paper.
Note The type and size settings can also be configured from HP JetAdmin for
networked printers. See the printer software help.
To print by type and size, it might be necessary to unload or close Tray 1,
or set
TRAY 1 MODE=CASSETTE from the Paper Handling Menu in the printer’s
control panel. For more information, see page 283 .
Settings in the printer driver and software application override control panel
settings. (Software application settings override printer driver settings.)