HP LaserJet 8000 Multifunction Printer series - Manual (Page 301)

Appendix B Control Panel Menus 301
Configuration Menu
JAM RECOVERY=
AUTO AUTO
ON
OFF This item determines how the printer behaves when a
paper jam occurs.
AUTO : The printer automatically selects the best mode for
printer jam recovery (usually ON ). This is the default
setting.
ON : The printer automatically reprints pages after a paper
jam is cleared.
OFF : The printer does not reprint pages following a paper
jam. Printing performance might be increased with this
setting.
MAINTENANCE
MESSAGE=OFF OFF This item appears only after the PERFORM PRINTER
MAINTENANCE message displays.
OFF : The PERFORM PRINTER MAINTENANCE message will be
cleared and will not be displayed again until the next
maintenance is due.
The message should not be turned off unless the printer
maintenance has been performed. If the required
maintenance is not performed, the printer’s performance
will degrade.
Item Values Explanation