Problems with the optional envelope feeder – HP LaserJet 8000 Multifunction Printer series User Manual

Page 211

Advertising
background image

Chapter 5

Problem Solving

211

Determining Printer Problems

Problems with the Optional Duplex Printing Accessory

Printer does not
recognize the duplexer

z

Remove and re-install the unit.

z

Be sure that the duplexer has been configured in the printer driver.

z

Print a configuration page to check that the unit is present.

Job did not duplex

z

Check that the duplexer is installed.

z

Be sure the duplexer has been configured in the printer driver.

z

Make sure that the software is not overriding the printer driver setting.

Duplexer jams

z

Ensure that you are using the supported paper weights (page

256

).

Problems with the Optional Envelope Feeder

Situation

Solution

Envelope jams and
envelope feeding
problems.

z

Make sure the envelopes are within the specifications listed on
page

267

.

z

Make sure the envelopes are properly loaded.

z

Make sure the envelope weight on the feeder is down.

z

Make sure the Optional Envelope Feeder extension is fully pulled
out.

Multiple envelopes feed
into the printer.

z

The first envelope to be fed must be closer to the pick up roller
than the others.

Advertising
This manual is related to the following products: