HP LaserJet 8000 Multifunction Printer series - Manual (Page 313)

Appendix C Printer Memory and Expansion 313
Installing Memory
3 Grasp the screws and pull the formatter
board out of the printer. Place it on a flat,
non-conductive surface.
4 Remove the DIMM from the antistatic
package. Hold the DIMM with fingers against
the side edges and thumbs against the back
edge. Align the notches on the DIMM with
the DIMM slot. (Check that the locks on each
side of the DIMM slot are open, or outward.)
5 Press the DIMM straight into the slot (press
firmly). Make sure the locks on each side of
the DIMM snap inward into place. (To remove
a DIMM, the locks must be released.)
3
4
5