HP LaserJet 8000 Multifunction Printer series User Manual
Page 173
Chapter 5
Problem Solving
173
Understanding Printer Messages
MANUALLY FEED
[TYPE] [SIZE]
Load the requested paper into Tray 1.
Press
G
O
if the desired paper is already loaded in Tray 1.
Press
- V
ALUE
+
to scroll through the available types and sizes. Press
S
ELECT
to accept the alternate type or size.
MEMORY FULL
STORED DATA LOST
There is no available memory in the printer. The current job might
not print correctly and some resources (such as downloaded fonts
or macros) might have been deleted.
You might want to add more memory to the printer (page
MEMORY SETTINGS
CHANGED
The printer changed its memory settings because it did not have
enough memory to use the previous settings for I/O Buffering and
Resource Saving. This usually occurs after removing memory from
the printer, adding a duplexer, or adding a printer language.
You might want to change memory settings for I/O Buffering and
Resource Saving (although default settings are usually best) or add
more memory to the printer (page
).
MEMORY SHORTAGE
JOB CLEARED
The printer did not have enough free memory to print the entire job.
The remainder of the job will not print and will be cleared from
memory.
Press
G
O
to continue.
Change the Resource Saving setting from the printer’s control panel
(page
) or add more memory to the printer (page
).
Printer Messages (continued)
Message
Explanation or Recommended Action