HP LaserJet 8000 Multifunction Printer series User Manual
Page 175
Chapter 5
Problem Solving
175
Understanding Printer Messages
RAM DISK FILE
SYSTEM IS FULL
Delete files and then try again, or turn the printer off, and then turn
the printer on to delete all files on the device. (Delete files using
HP JetAdmin, HP FontSmart, or another software utility. See the
software help for more information.)
If the message persists, increase the size of the RAM disk. Change
the RAM disk size from the Configuration Menu in the printer’s
control panel (page
).
STAPLER LOW
ON STAPLES
The stapler device is running out of staples and needs to be refilled.
TONER LOW
See page
.
TRAY x EMPTY
Load the empty tray (
x
) to clear the message.
If you do not load the specified tray, the printer will continue printing
from the next available tray, and the message will continue to
display.
Printer Messages (continued)
Message
Explanation or Recommended Action